The operational costs in the crude oil industry are very expensive. One of the stages of oil processing in the crude oil industry is the measurement of water content and density. If the measurement at this stage is not accurate, then it will cause a large loss. Crude oil released from or to tankers still has inaccurate water content and density. While technology continues to grow there are many tools to meet your needs in measuring water content in crude oil. A sophisticated tool that is often used to ensure accurate measurements is Custody Transfer static mixer. This sophisticated tool is installed in front of your sample port.
Install a Custody Transfer static mixer upstream from the sampling point in the crude oil transfer line. The intense mixing action results in the size and distribution of water droplets. It distributes the droplets over a wide flow range. This allows the automatic sampler to take truly representative samples of pipe contents. Basic sediments and water began dispersing throughout the crude oil flow with this static mixer.
This unique inline static mixer has four mixing zones that interact between each set of elements. The first part of the element directs the flow from the bottom of the pipe wall. Forcing the mixture flow upwards. The second part reverses the process, forcing the flow back to the bottom of the pipe. The same mixing action occurs from side to side of the pipe wall. This ensures that BS & W is spread along the pipe. BS & W is the measurement of impurities in liquid hydrocarbons such as crude oil. Crude oil will contain several waters and particles from the reservoir formation. BS & W of fluid hydrocarbons measures free emulsion of water, sediment, and oil as a percentage volume.
The design of the custody transfer static mixer is to lift and mix. Or it disperses heavier water which can be at the bottom of the transfer pipe. Measuring the amount of water in crude oil effective and accurate with a crude oil pipe. Custody Transfer static mixer allows the measurement of water content. Using a non-contact analysis tool. The design of the mixing element is to draw water from the pipe wall. This then mixes into small droplets that spread evenly through the entire diameter of the pipe.
Custody Transfer static mixer provides another sophistication. It can eliminate spinning centrifugal forces that can force water back into the pipe wall. Therefore, all the rotational forces in the flow prevent the flow of spiral water back into the pipe before reaching the analyzer. Custody Transfer static mixer is very useful for your crude oil business. In short, this tool will give you effective and accurate measurement results. To sum up, it avoids you from loss. Interested in this sophisticated tool? Don’t worry, you can get it through KOMAX.