Komax static wafer mixers are designed to be used where there is not enough room to accommodate a more common static mixer. They are also a great choice when the budget is a bit too limited to install a more complex static mixer. The way our static wafer mixer works is relatively simple. It is designed so that it is sandwiched in between two pipe flanges. This is a relatively basuc yet extremely clever design that provides an excellent mixing performance and it does so with very low coefficient of variation (COV).
The mixing results that the Komax System’s wafer mixer centerline injection along with the distribution elements can be achieved at different flow conditions. This makes it far superior then other wafer mixers that are on the market. Our wafer mixer is created so that it is able to reduce energy loss of the flow as the liquid goes through the static mixer and it is able to achieve this since more of the flow is adhered to the walls of the wafer mixer. This will avert the flow separation which can happen with more inferior wafer mixers that are out there.
Best of all, the Komax Static Wafer Mixer is able to achieve the above results in a very confined space and at a lower cost them most other mixers. With factory space at a premium these days, this design is becoming more and more important for many businesses. It’s a great choice for companies that need the mixing of liquids or liquid-like chemicals in a confined space since their design makes the wafer mixer as thin as possible. It will fit between flanges and it comes in a variety of sizes to help it fit in areas where other static mixers simply will not fit. It also has a range of uses and can be used for water treatment uses such as for chlorination, coagulation, pH control, caustics.
To learn more about how it might help in your space, contact us today.